Optimized Beamforming model for mmWave MIMO Antenna for vehicle-to-everything applications With Radar Communications

Sonali Mondal; Vasani Vaibhav Prakash

doi:10.31838/

Authors

Sonali Mondal Assistant Professor, Department of CS & IT, Kalinga University, Raipur, India.
Vasani Vaibhav Prakash Research Scholar, Department of CS & IT, Kalinga University, Raipur, India.

DOI:

https://doi.org/10.31838/

Keywords:

Beamforming, Antenna, Vehicle-To-Everything, Radar, Multiple Input Multiple Output

Abstract

MillimeterWaves (mmWave) RadarCommunicating(RC) technologies are anticipated to mitigate spectrum collision and radiointervention in fifth-generation (5G)Vehicles-To-Everything (V2X) networks.The dimensions of radar objectives in the V2X technology should not be overlooked, considering the need for short-distance detection and beams facilitated by mmWave beamforming. In this context, a unique Singular-Targeted-Multiple-Beams (STMB) beam-formation technique is developed to provide greater accuracy regarding estimated distances and speeds by distributing multiple radio beams to a specific goal. The comparable velocity orientation can be precisely calculated utilizing the STMB scheme through balanced linear estimating techniques.The mixture of analog-digital beamforming using the STMB system is developed and improved by improving the propagation rate while adhering to radar signals-to-interference-to-noise (SINR) limitations. A beam cancellation method is suggested for automatically adjusting the number of radar beams directed at a specific target, ensuring compliance with stringent radar SINR limitations across varying distribution power stages.The results confirm the efficacy and dependability of the proposed method, demonstrating that the suggested method surpasses the standard in terms of spectrum effectiveness and minimal radar SINR.

Author Biography

Vasani Vaibhav Prakash, Research Scholar, Department of CS & IT, Kalinga University, Raipur, India.

References

Wagih, M., Weddell, A. S., & Beeby, S. (2020). Millimeter-wave power harvesting: A review. IEEE Open Journal of Antennas and Propagation, 1, 560-578.

Naik, G., Park, J. M., Ashdown, J., & Lehr, W. (2020). Next generation Wi-Fi and 5G NR-U in the 6 GHz bands: Opportunities and challenges. IEEE Access, 8, 153027-153056.

Moraitis, N., Vouyioukas, D., Gkioni, A., &Louvros, S. (2020). Measurements and path loss models for a TD-LTE network at 3.7 GHz in rural areas. Wireless Networks, 26, 2891-2904.

Kang, M. (2024). A Study on the Effect of Information and Communication Technology (ICT) on Trade in Services in the United States. Journal of Internet Services and Information Security, 14(1), 266-281. https://doi.org/10.58346/JISIS.2024.I1.017

Ma, D., Shlezinger, N., Huang, T., Liu, Y., & Eldar, Y. C. (2020). Joint radar-communication strategies for autonomous vehicles: Combining two key automotive technologies. IEEE Signal Processing Magazine, 37(4), 85-97.

López, M. B. V., García, M. Y. A., Jaico, J. L. B., Ruiz-Pico, Á. A., & Hernández, R. M. (2023). Application of a Data Mining Model to Predict Customer Defection. Case of a Telecommunications Company in Peru. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 14(1), 144-158. https://doi.org/10.58346/JOWUA.2023.I1.012

Krishnamoorthy, A., & Schober, R. (2022). Downlink MIMO-RSMA with successive null-space precoding. IEEE Transactions on Wireless Communications, 21(11), 9170-9185.

Kavitha, M. "Embedded System Architectures for Autonomous Vehicle Navigation and Control." SCCTS Journal of Embedded Systems Design and Applications 1.1 (2024): 25-28.

Pedraza, F., & Caire, G. (2024). Sensing-Assisted Beam Tracking for mmWave V2I Communications with Analog, Hybrid, and Digital Antenna Architectures. IEEE Transactions on Wireless Communications.

Cao, S., Yang, H., Lu, S., and Qian, F. "Fine Tuning SSP Algorithms for MIMO Antenna Systems for Higher Throughputs and Lesser Interferences." International Journal of Communication and Computer Technologies, vol. 12, no. 2, 2024, pp. 1-10.

Cui, Z., Guan, K., Zhang, J., & Zhong, Z. (2021). SNR coverage probability analysis of RIS-aided communication systems. IEEE Transactions on Vehicular Technology, 70(4), 3914-3919.

Ch, Pallavi, and G. Sreenivasulu. "A Hybrid Optical-Acoustic Modem Based on MimoOfdm for Reliable Data Transmission in Green Underwater Wireless Communication." Journal of VLSI Circuits and Systems, vol. 6, no. 1, 2024, pp. 36-42.

Rao, M., & Deshmukh, T. (2024). Comparative analysis of video compression techniques for low-bandwidth applications. International Journal of Communication and Computer Technologies, 10(2), 56–63.

Sharma, A., & Gupta, R. (2023). Energy-efficient routing protocols in wireless sensor networks: A comprehensive survey. Journal of Wireless Sensor Networks and IoT, 5(2), 45–58.

Kavitha, M. (2024). Embedded system architectures for autonomous vehicle navigation and control. SCCTS Journal of Embedded Systems Design and Applications, 1(1), 25–28.

Patel, S., & Kumar, V. (2022). Recent advancements in nanomaterials for energy storage applications: A review. Innovative Reviews in Engineering and Science, 4(1), 12–27.

Muralidharan, J. (2024). Advancements in 5G technology: Challenges and opportunities in communication networks. Progress in Electronics and Communication Engineering, 1(1), 1–6.

Li, X., & Wang, Y. (2023). IoT-based smart home automation systems: Security challenges and solutions. Journal of Wireless Sensor Networks and IoT, 5(3), 102–115.

Patel, N., & Sharma, R. (2024). Low-power SRAM design for AI edge devices using 7nm technology. Journal of VLSI Circuits and Systems, 6(3), 34–42.

Uvarajan, K. P. (2024). Integration of artificial intelligence in electronics: Enhancing smart devices and systems. Progress in Electronics and Communication Engineering, 1(1), 7–12.

Choudhary, S., & Gupta, P. (2024). Role of edge computing in enhancing IoT communication systems. International Journal of Communication and Computer Technologies, 10(2), 45–55.

Ahmed, N., & Singh, P. (2022). Machine learning approaches in predictive maintenance: Techniques and applications. Innovative Reviews in Engineering and Science, 4(2), 78–91.

Abdullah, D. (2024). Leveraging FPGA-based design for high-performance embedded computing. SCCTS Journal of Embedded Systems Design and Applications, 1(1), 29–32.